Archive for the ‘Damage Prevention’ Category

Ontario Safety Campaign Will Target Construction Sites

Thursday, August 26th, 2010

The Ontario government recently launched an eight-week health and safety awareness campaign designed to enlighten construction workers and their employers.

They unveiled the campaign at Algonquin College, at the site of the school’s  new construction trades building, which will open to about 2,500 construction trades students next year. The new campaign follows a 90-day safety enforcement blitz of more than 2,800 construction sites.

Even though the province’s lost-time injury rate among construction workers is one of the lowest in Canada, the 90-day blitz revealed numerous violations, including improper equipment use and poor supervisor and worker training. As a result, Ontario officials decided that it was time to emphasize the need for the entire construction industry to learn the importance of safety.

The campaign is being run in Canadian cities with the highest construction activity, including Ottawa.  It is sponsored by the Ministry of Labour, the Workplace Safety and Insurance Board and the Infrastructure Health & Safety Coalition, and will feature newspaper advertising in the key ethnic languages spoken in the construction sector, and posters will appear on construction fences.  Tip sheets for workers will be available on the ministry’s website at www.ontario.ca/ConstructionSafety.

Another aspect of the campaign revolves around a hope that the public can become more involved in providing information to ministry officials. To that end, a toll free phone number (1-877-202-0008) has been established for the public to call in and report safety issues they see. If a follow-up visit deems a jobsite unsafe, the province can issue a stop-work order in the interests of safety.

  • Share/Bookmark

Skyway Canada Fires YouTube Tool Tossing Construction Worker

Wednesday, August 25th, 2010

A Calgary construction worker who became a YouTube sensation when he made a joke out of high rise construction safety has been terminated by his employer.

Last week, the president and CEO of Skyway Canada, Gary Carey, confirmed that, after an internal investigation of the incident, one employee was fired.

The video, which was posted on YouTube in October 2009, shows a number of construction workers as they worked from scaffolding on the 29th storey of a condo development under construction. One worker could be seen tossing a metal clamp and passing a co-worker a metal rod. The worker who tossed the tool was fired for violating company policies. Another worker was suspended, but allowed to return to work after the investigation, after it was determined that he wasn’t involved in the prank, and had actually voiced his objections to the other workers. A third worker involved in the video is no longer with the company.

When the video was discovered online, it was passed to company and government officials, all of whom saw the behaviour as offensive, especially since it came approximately two months after the tragic death of three-year-old Michelle Krsek, who was killed by metal roofing material that fell from a downtown Calgary high rise construction site.

Skyway still has to submit a report to Occupational Health and Safety officials.

  • Share/Bookmark

Toronto Researcher Hopes to Develop “Snow Tires for Feet”

Thursday, August 19th, 2010

A Toronto researcher is looking at ways to reduce the number of falls on ice, by trying to develop what she refers to as “winter tires for feet.”

Jennifer Hsu, (her name is pronounced “shoe” — no lie), a PhD candidate in biomedical and mechanical engineering at the University of Toronto, has spent a large portion of her summer inside of a cold lab at the Toronto Rehabilitation Institute,  trying to find out more about why and how people fall during the winter months, in the hope that she might design shoes that could ultimately help to  prevent falls.

Hsu has been concentrating on falls by postal workers in the past, because they work outside in all conditions and often lose work time because of injuries suffered through falls on ice. More specifically, she’s looking at the cleats Canada Post provides for mail carriers.

Coat wearing volunteers in the climate-controlled lab,  which is typically set to temperatures as low as –20°C, traipse over walkways  designed to imitate surfaces such as steep ramps and stairs, while sensors record their movements. Each volunteer is equipped with a safety harness to prevent them from being injured.

In addition to researching the materials and design of the shoes, Hsu is also examining how people walk while wearing different types of footwear.

Past research has shown that most falls occur at a temperature of about 0°C outside, when a thin layer of water ices over, or after a thick layer of snow falls on top of ice . It is estimated the injuries due to falls cost the Canadian health care system about $2.8 billion a year.

Hsu’s research is being conducted with the help of an Ontario Workplace Safety and Insurance Board grant.

  • Share/Bookmark

Ontario Sets up Safety Training Campaign, Hotline.

Monday, August 16th, 2010

Following a recent  90-day safety enforcement blitz of more than 2,800 construction sites that uncovered what the Ontario Labour Ministry considered to be an unacceptable number of safety infractions throughout the province,  the government has launched a new campaign aimed at worker safety education.

The blitz found violations ranging from missing guardrails to inappropriate use of scaffolding, and laid bare a marked lack of worker and supervisor training.  As a result, the ministry has ordered a culture change of sorts, and have made a new commitment to constant prevention and protection.

The new safety campaign will focus on education, and features posters with X-rays of broken bones with the tagline “Don’t let these be the last pictures someone takes of you.” The ministry will also operate a toll-free line, 1-877-202-2008, for anyone to report unsafe conditions on a work site.  To encourage absolutely anyone who sees something unsafe to call the line, all calls will be anonymous, and all will be passed on to inspectors for investigation.

The ministry also intends to pass on the message through its web-site and Twitter, as well as in ethnic newspapers, where it will be delivered in 10 languages.

  • Share/Bookmark

Saskatchewan Roofing Firms Face Scrutiny on Safety

Wednesday, August 11th, 2010

Saskatchewan roofing companies may face serious fines if they fail to implement safety procedures as provincial authorities continue a major crackdown on this growing industry.

Since April, eight roofing companies in the province have been fined for violating safety standards. Most of the fines are related to workers not wearing proper harnesses while on the job.

Saskatchewan Occupational Health and Safety has stepped up enforcement in the hopes that increased fines and scrutiny will serve as a warning to companies, and make them aware that they will be punished if they don’t make workers wear fall protection.

While most support the increase in enforcement, some actually side with the companies, who often feel challenged by keeping workers trained and certified, given the industry’s high employee turnover.  Occupational Health and Safety officials, however, note that a lack of resources is never a good excuse for lax safety.

Provincial officials would also like to make homeowners aware that, when using smaller roofing companies, they should check to be sure they’re covered through Workers Compensation. If a company is not carrying the proper insurance coveraged, the homeowner might be liable for any injury sustained by the worker.

Occupational Health and Safety intends to continue, and even step up inspections until all roofing companies comply with the rules.

  • Share/Bookmark

Alberta to Post Names of OH&S Violators Online

Monday, August 9th, 2010

Alberta’s provincial government has decided it’s time to get tough in its approach to occupational health and safety.

In a decision intended to send a message to every company that fails to comply with health and safety rules, Employment Minister Thomas Lukaszuk has announced that “the hammer is coming down,” so beginning this September,  the safety records of Alberta’s scofflaw companies will be posted online.

The announcement comes in the wake of increased criticism for what many consider to be its lax enforcement of occupational health requirements. Over the next several months, the province will make procedural changes designed to step up enforcement, and ensure that workplace safety directives are more effectively enforced.

The overall objective is to make sure all employers in Alberta understand the consequences of non-compliance with occupational health and safety rules. In addition to the online publication of the names of non-compliant companies, the province will also hire eight more workplace safety officers, and has started a pilot project to inspect workplaces at night and on weekends. It will now be tougher to ignore the rules.

Eight years ago, the government promised to publicize businesses’ workplace safety records, but decided privacy rules prevented it from doing so. Lukaszuk, however, claims that he recently checked with experts and found that to be untrue.

In April, the Auditor General’s office lambasted the government for allowing a relatively small group of employers to routinely violate occupational health and safety orders. Those companies were found to have had worker injury rates three to four times higher than the provincial average.

  • Share/Bookmark

More Huge Fines For Health And Safety Violations

Friday, August 6th, 2010

Ontario courts continue to slam companies with huge fines for violations of the Occupational Health and Safety Act.

Wal-Mart Canada Corp., for example, was hit with two fines totaling $120,000 in less than a month; a $45,000 fine on June 23 and a $75,000 fine on July 16.

The $45,000 fine resulted from an incident that occurred on September 27, 2008. A worker was operating a forklift outside a Wal-Mart store in Barrie, to place skids of bottled water near the main entrance. While doing so, the forklift struck and injured a customer’s feet.

A Ministry of Labour investigation found that the worker did not have full view of the forklift path of travel and its load.

In that case, the company pleaded guilty to failing to ensure that the operator of material handling equipment has a full view of the intended path of travel of the equipment or its load, and to failing to make sure material handling equipment is only operated as directed by a competent signaler who is stationed in full view of the operator with a full view of the intended path of travel of the vehicle and its load.

The $75,000 fine resulted from an incident that occurred on January 19, 2009, when a worker employed by a Wal-Mart store in Welland climbed a ladder to get five boxes of toys from a shelf. As the worker began to climb back down with the boxes held in one arm, he missed a step at the bottom of the ladder and fell, injuring his arm.

A Ministry of Labour investigation found that the worker carried the boxes in such a way that his or her safety was endangered by not keeping the required level of contact with the ladder.

Wal-Mart Canada Corp. pleaded guilty to failing to ensure that materials required to be lifted, carried or moved were lifted, carried or moved in a way that did not endanger the safety of any worker.

Also on July 16, Concord-based Welded Tube of Canada was fined $140,000 for an incident that occurred on July 31, 2008, in which a worker was injured as he prepared a two-and-a-half ton bundle of steel tubes and sent them down a conveyor to be processed for shipping. That worker and a co-worker then began to make a mechanical adjustment in the path of the conveyor. The bundle of tubes needed to be rearranged, so it was sent back on the same conveyor, where it struck the worker and injured his leg.

A Ministry of Labour investigation found that the conveyor was not protected by a guard to prevent access to the path of travel while it was in motion.

Welded Tube of Canada pleaded guilty to failing to ensure that a machine with moving parts that may endanger a worker is equipped with a guard or other device which prevents access to the moving parts.

And on July 9, 2010, grocery store operator Metro Ontario Inc. was fined $100,000 for an incident that occurred on January 18, 2009. A worker at the company’s North Bay location was using a band saw to cut beef in the meat department, when his hand slipped, and the saw’s blade partially amputated some of his fingers.

That Ministry of Labour investigation found that the machine’s blade was improperly guarded, and Metro Ontario Inc. pleaded guilty to failing to ensure the saw was equipped with a guard that prevented access to its moving blade.

In addition to the huge fines levied in the cases above, in each case the court imposed a 25% victim fine surcharge, as required by the Provincial Offences Act, which is credited to a special provincial government fund to assist victims of crime.

  • Share/Bookmark

Once Again Calgary Targets Construction Safety

Friday, July 23rd, 2010

After one of the most dangerous years in the city’s construction history, Calgary’s manager of building regulations has called on Alberta provincial officials to increase fines significantly for those companies found guilty of safety-code violations especially those, such as failing to secure building materials, that not only endanger workers, but the public at large.  He notes that the maximum $15,000 penalty for potentially deadly violations is significantly lower than for breaches of other safety laws, and doesn’t reflect the seriousness of the incidents.

This call comes in the wake of a series of incidents of falling debris that have occurred in the last year at high rise construction sites throughout Calgary, including falling steel that killed 3-year-old Michelle Krsek and injured an uncle last August.

The latest case being investigated by the city involves an online video, recorded last October but just recently discovered and passed on to authorities that was forwarded to city authorities, depicting construction workers with Skyway Canada horsing around recklessly on a Beltline tower. In the video (which has been removed from the YouTube video site), one worker actually tosses a metal clamp across scaffolds and jokes about the potential disaster if the tool had fallen and struck a passer-by. After learning of the video, Skyway Canada suspended two of the workers seen in the video. A third worker visible in the video had already left the company.

In addition to increased fines, city officials would also like to see greater reporting of incidents to the city. Currently, when near-misses or injuries occur, companies are required to report to the provincial Occupational Health and Safety office, but not to the city.  The city would like to see mandatory reporting to the city. The Calgary city council doesn’t have the legal authority to require such a thing, so the city is currently forced to rely on a voluntary reporting program for the city’s construction industry.

  • Share/Bookmark

Three Easily Preventable Accidents = Three Poorer Companies

Wednesday, July 21st, 2010

The Ontario courts were busy last week, and in the space of four days, worker accidents cost three companies a lot of money.  Take a look at the details of each accident; every one of them was easily preventable with just some basic safety training and worker awareness.

1. In one case, elevator and escalator manufacturer Kone Inc. was fined $90,000 for a violation of the Occupational Health and Safety Act that caused a worker to be injured.

The fine was for an incident that occurred on September 11, 2008, when a worker was repairing an elevator circuit board at the University of Western Ontario. The worker stood on a ladder in the pit and shaft area of the elevator while the elevator’s power was still on. As if that wasn’t bad enough, the worker wasn’t using rubber gloves, mats, shields, or other equipment to protect against electrical shock. Of course, when the worker touched the back of the circuit board, the resultant electric shock caused him to fall to the concrete floor of the pit, resulting in wrist and facial fractures.

Kone Inc. pleaded guilty to failing to ensure the worker used rubber gloves, mats, shields and other protective equipment and procedures adequate to ensure protection from electrical shock and burns.

2.  In another case, a $60,000 fine was imposed on Tri City Materials Ltd., a company that works with aggregates, after it, too, pleaded guilty for a violation of the Occupational Health and Safety Act that caused an injury to a worker.

The incident that led to this fine occurred on December 30, 2008. A worker was cleaning out a trailer that acted as a hopper for various materials. Because the hopper’s chute needed power to stay open, the truck attached to the trailer was left running.  Unfortunately, when another worker shut off the truck during the cleaning process, the chute gate immediately closed and caught the worker’s leg.

A Ministry of Labour investigation found that the company’s procedure for safely cleaning the trailer required that it be locked out with its chute gate manually wedged open. They determined that the worker was improperly trained, and was unfamiliar with this procedure or the hazards associated with cleaning out the trailer.

Tri City Materials Ltd. pleaded guilty to failing to acquaint the worker with the hazards associated with cleaning out the trailer.

3. Within days of the above fines, Abitibi Consolidated Company of Canada, owner and operator of a paper mill in Fort Frances, was slapped with a $125,000 fine for their violation of the Occupational Health and Safety Act for an accident that injured two workers and a student.

That incident occurred on August 20, 2008, when two of the paper mill’s electricians were changing the power box for part of a paper machine. In this case, the power to the box itself was locked out, but the power to the cabinet containing the box was not shut off or locked out. As the electricians removed the power box, they noticed a cable inside the cabinet that needed to be moved, so one of them reached into the cabinet with a metal tool to remove a clamp holding the cable in place. In doing so, the tool made electrical contact with a live conductor inside the cabinet, creating an arc flash, which in turn caused another arc flash from the live conductors overhead.

The accident caused both electricians to suffer first, second and third degree burns. At the same time, a student who was standing nearby and watching them suffered first degree burns.

Abitibi Consolidated Company of Canada pleaded guilty to failing to ensure that a tool was not used near a live electrical installation to prevent electrical contact with a live conductor.

In addition to the $275,000 in fines in the three cases above, the court also imposed a 25% victim fine surcharge, as required by the Provincial Offences Act. The surcharge is credited to a special provincial government fund to assist victims of crime. That puts the total cost to these three companies at more than $343,000, all for accidents that could have been prevented with a little health and safety awareness.

Proper health and safety training doesn’t cost. It pays.

  • Share/Bookmark

Boom Truck Operator Injured in Windsor Parking Garage Collapse

Monday, July 12th, 2010

The mayor of Windsor, Ontario, Eddie Francis, declared a state of emergency July 8 after a parking garage collapsed at about 10:40 a.m., crushing numerous cars and sending one person to hospital. The state of emergency allowed the city access to provincial emergency response teams to delve into the wreckage to help search for any victims.

According to witnesses, the only man injured was the operator of a boom truck near a building entrance. He was using the boom truck to prepare for the commencement of building maintenance work when the pavement under his truck gave way. The collapse caused the operator to be thrown from his cab, and he was hanging by his safety belt when rescue workers arrived at the scene. They quickly used a pulley system to lift him to safety, fitted him with a neck brace and transported him to hospital.

Search dogs and a camera-equipped robot combed through the rubble of the underground structure to look for victims. Thankfully, the dogs found no one in the lower levels.

The aftermath of the collapse was a remarkable sight, according to witnesses. Several vehicles that had been parked on the ground level were leaning into the hole, while others sat precariously on yellow steel pillars. As time passed, the hole slowly grew bigger and the cars slid farther in.

A nearby apartment building was evacuated as a precaution, with tenants put up in nearby hotels until the building could be declared safe.

Municipal officials refused to speculate on the cause of the accident, but noted that the parking lot had a lot of cars, and that the likely cause was that the structure wasn’t capable of handling the load. The boom truck weighs about 10,000 kilograms.

  • Share/Bookmark